
An inspector asks for the scalding risk assessment for the hot water outlets in the assisted bathroom, and the facilities manager says the maintenance contractor holds it. The inspector writes that down. So does the insurer, later, when a resident is treated for a scald and the claim lands on the director's desk with a request for the last twelve months of outlet temperature checks.
That is the pattern I see most often with hot water scalding risk in care settings. Responsibility rests with the organisation. The evidence sits with a contractor, or in a folder nobody has opened since the last audit, or nowhere at all.
The duty is yours, and HSE treats scalding as a non-clinical accident
HSE is the national independent regulator for health and safety in the workplace, and its remit covers private and publicly owned health and social care settings in Great Britain. It works with local authority co-regulators to inspect, investigate and enforce. Healthcare is managed and regulated differently in England, Scotland and Wales, so the route to your door depends on where the building sits.
Scalding is named directly in HSE's own guidance. RIDDOR-reportable incidents that HSE tends to investigate include major non-clinical accidents such as trips and falls, scalding, and those arising from people handling. That is the sentence to read twice. A scald in a hospital bathroom or a care home assisted shower is not filed as a clinical incident and left there. It is a non-clinical accident, and it can be reportable.
HSE will generally only investigate where the incident is reportable under RIDDOR and falls within its incident selection criteria. It will investigate non-reportable incidents only where a death has occurred, or where the harm was so serious that death may have resulted, and where admissible evidence is likely to be available. So the question is not whether your hot water is broadly fine. It is whether a single outlet, on a single day, produced water hot enough to harm someone who could not get out of the way.
The HSE guidance on who regulates health and social care sets out the systemic failures it looks for. Absence of, or wholly inadequate, arrangements for assessing risks. Inadequate control of identified or well recognised risks. Inadequate monitoring or maintenance of the procedures or equipment needed to control the risk. Read those three back and you have the shape of most scalding failures: no assessment, no control, no record that either was maintained.

The direct penalty is the small number. The knock-on costs are the ones that reach the board
HSE enforcement is the visible cost. The larger cost is what follows a serious scald in a care setting: the insurer's questions, the remediation programme, the occupied bed taken out of use while the bathroom is stripped and recommissioned, and the CQC or devolved regulator interest in how you managed the risk.
Insurers do not ask whether you care about scalding. They ask for the thermostatic mixing valve commissioning records, the outlet temperature log, the maintenance schedule, and the name of the person who signs off when a valve is adjusted. If those four things cannot be produced together, the claim conversation changes tone quickly.
There is also the void cost. In a care home, a bathroom out of action is a room that cannot be marketed and a resident who has to be moved. In a hospital, it is a bay closed and a clinical team working around you. Neither appears on the enforcement notice, and both appear on the director's monthly report.
What the inspector actually looks at in a hospital or care home
The inspector is not testing your policy. They are testing whether the control is in place at the outlet and whether the record proves it. In practice that means the scalding risk assessment for the building, the TMV (thermostatic mixing valve) schedule with each valve identified, the commissioning and annual service records, and the outlet temperature monitoring log with the dates and the initials of the person who took the reading.
They will also look at who is competent to do the work. PUWER, the Provision and Use of Work Equipment Regulations, requires work equipment to be right for the job, used safely by trained people, and maintained so it remains safe. The HSE guidance on equipment safety in health and social care makes clear that responsibility rests with the employer and the equipment provider who own, operate or have control over the equipment. A maintenance contract transfers the task. It does not transfer the duty.
In a care home, the inspector will also want to see how the risk assessment accounts for residents who cannot react to hot water: those with reduced sensation, dementia, or limited mobility. In a hospital, the same question applies to patients on wards where clinical judgement and building control meet, and where a scald can be attributed to the fabric rather than the care.
The pattern I see is a building with a full set of TMV records for the main plant and a gap for the assisted bathroom that was refurbished two years ago. The refurbishment is the risk. New outlets, new valves, and a commissioning certificate that went to the contractor and never came back.
The cheaper path is boring, and it is mostly about who holds the paper
The cheap version of this is not a new system. It is a named person, a schedule, and a folder that can be produced on request. Name the responsible person for scalding control in each hospital and care home. Give them the TMV register, the outlet monitoring schedule, and the authority to stop using an outlet until it is fixed.
Then test the chain. Ask the facilities manager to produce, today, the last twelve months of outlet temperature records for one assisted bathroom. If the answer involves a call to a contractor and a wait, the control is not in your hands. That is the gap an inspector will find, and it is the gap an insurer will price.
There is a second cheap step that most portfolios skip: check that the scalding risk assessment has been reviewed since the last change of use, refurbishment or change of contractor. A risk assessment written for the building as it was three years ago is not evidence for the building as it is now. HSE's view of systemic failure includes inadequate monitoring and maintenance of the procedures or equipment needed to control the risk, and an out-of-date assessment is exactly that.
If you are also managing water hygiene in the same buildings, the discipline is familiar. The HSE legionella case that turned on exposure risk rather than illness is the same lesson in a different pipe: the regulator does not need a victim to find a failure. And if your team is already stretched across ACMV and water systems, the contract clauses that keep energy and compliance evidence in your hands are worth reading alongside this.
The infection prevention and control guidance from the UK Health Security Agency and the Department of Health & Social Care is a useful reminder of how the same building serves people who are vulnerable in different ways. The guidance on why infection prevention and control matters in adult social care sets out the principle of using the best controls first and PPE last. Scalding control follows the same logic: engineer the risk out at the valve, then monitor, then rely on people remembering.
Your 60-second self-check
- Could you produce today the current TMV commissioning and service records for every assisted bathroom in each of your care homes and hospitals?
- Can you name the person who signs off an outlet temperature reading, and the person who authorises an outlet to be taken out of use?
- Has the scalding risk assessment for each building been reviewed since the last refurbishment or change of maintenance contractor?
If any of those three made you pause, you are not the only one facing this, and you are also not yet in a position to answer the question a director or an insurer will ask. The free five-minute Director's Risk Check gives you a control score for your portfolio before a more senior colleague requests it, with a traceable source for every item. Run it at the HermanWa Director's Risk Check for the UK, and send it to the person who actually keeps the records if that is not you.
Herman's verdict
A scalding claim is rarely about a broken valve. It is about a building where nobody could produce the paper that proved the valve was working, and that is a management failure long before it is an engineering one.
— Herman
Until next time — keep the evidence closer than the deadline.
Walk into your next senior management meeting with the answers
The free Director's Risk Check for UK portfolios takes five minutes. No sign-up to see your score.
- Your control score across compliance, evidence, oversight, cost and renewals
- The breach exposure in your portfolio, with the official source for each penalty
- A board-ready briefing with your three priorities and a 30/60/90-day plan
About HermanWa
HermanWa is a building compliance and operations platform for property and facilities teams in the United Kingdom and Singapore, with portfolios across the Gulf. It keeps one auditable file per building — statutory deadlines, inspection evidence, contractor work, energy and carbon — and its AI assistant, Herman, answers questions about your buildings in plain English. HermanWa tracks obligations including fire risk assessments and fire door checks, Building Safety Act duties, Legionella (ACOP L8), EICR, gas safety and EPC in the UK, and SCDF fire certificates, Periodic Facade and Structural Inspections, lift permits and Green Mark in Singapore. Directors can check their exposure with the free Director's Risk Check.